Low MOQ For 0.5 Mm Carbon Fibre Sheet - Carbon Fiber Tabletop for DR CT Scanner – Weadell Detail:
Light weight
strong built
Corrosion
resistance
Impact
resistance
Antistatic
Radiolucent
Surface
antibacterial
Scratch
resistant
Moisture
proof
Weadell Composite mHPL Table-Tops is a sandwich structure composite plate, its upper and lower surface using mHPL, core material using special rigid foam. It is the result of systematic improvements to offer the best support for the radiation medicine application. The tabletop overall is lightweight, thin, of high strength, and possess great transradiancy and clean imaging result. Therefore, it is an ideal tabletop choice for all types of X-ray machines.
Eligible X-Ray Imaging
Its Imaging results show
• Pure black background
• No spots or blemishes that might interfere with the clinical diagnosis
Making product with these performance is highly related to our raw material selection, process technique and quality control.
Radiolucent
When x-rays pass through the melamine resin, the material does not block the light, so the attenuation can be low. In other words, it is radiation transparent to x-rays. Using melamine resin as the top boards, radiographic medical system can permit short scanning duration and precise results, can reduce radiation doses, which in turn prevent patients from overexposure.
Lightweight but Strong
Can be made very thin to fit modern design.
Excellent load bearing and impact resistance confirmed by the relevant tests according BSEN438-2/91.
Sandwich construction
• Medical HPL(mHPL) as surface
• Rigid foam based on PMI or close cell PVC as core
• Optional lining edge as structural reinforcement
• Environment-friendly composite adhesive
Rigid foam core based on PMI
• Low density ensures excellent transradiancy
• Excellent strength to weight ratio
• A variety of specifications density optional, flexible adjustment and customization
Special embedded nut
The insufficient holding force of composite is a common problem. But do not worry about that, we can pre-install special built-in nut, to ensure that the product can be dis- and assembled many times.
End edges with PVC-band
• High quality PVC material
• Automatic Banding machine guarantees the sealing quality
1. Resistance to Impact
2. Resistance to Scratching
3. Wear Resistance
4. Easy to Clean
1. Resistance to Impact
The thermoset structure, with the solid phenol core and the melamine surface, provide the panel very strong mechanical performance, which is confirmed by the impact test, according BSEN438-2/91, measuring the degree of depression after a sphere hit.
2. Resistance to Scratching
Special surface structure, so that the melamine surface has scratch resistance, even against a variety of hard objects can also maintain long-term undamaged.
3. Wear Resistance
The test of BSEN438-2/91 proved that the melamine plate has strong wear resistance and is suitable for places where heavy objects are placed or places where frequent cleaning is required.
4. Easy to Clean
The tight, non-permeable surface makes it difficult for dust to adhere to it, so the product can be easily cleaned with the relevant solvent without any damage on surface.
5. Moisture Resistance
6. Fireproof
7. Electro-Static Discharge
8. Chemical Resistance
5. Moisture Resistance
Melamine board core uses special thermosetting resin, so will not be affected by weather changes and moisture, will not decay or produce mold. Its stability and durability is comparable to that of hardwood.
6. Fireproof
The test of bsen 438-2/91 showed that the surface of melamine plate has strong protection ability against burning cigarette. The material is flame retardant, the panel does not melt, Drip or explode, and can maintain its properties for a long time. Various European tests have shown that the material has a high level of fire resistance. In France, the material is rated F1 for its non-release of toxic and corrosive gases, as shown in the melamine plate test NFX70100 and NFX10702, it’s one of the best materials for construction. In China, melamine plate by the National Fire Materials Testing Center, its combustion performance GB8624-B1.
7. Electro-Static Discharge
According to DIN51953 and DIN53482, melamine plates can be produced as anti-static materials, which makes the plates very suitable for dust-free areas such as hospitals, pharmaceutical factories, food industries, electronics industries and optical and computer industries.
8. Chemical Resistance
Physical and chemical plate has strong chemical corrosion resistance, such as: acid, oxidation of toluene and similar substances. Melamine plate can also prevent disinfectants, chemical cleaning agents and containing food juice, dye erosion. They will not affect the properties of melamine plate, also will not affect the surface, for the frequent use of strong acid, we recommend the use of high-strength anti-chemical properties of the physical and chemical plate.
Product detail pictures:
Related Product Guide:
we can offer high quality products, competitive price and best customer service. Our destination is "You come here with difficulty and we give you a smile to take away" for Low MOQ For 0.5 Mm Carbon Fibre Sheet - Carbon Fiber Tabletop for DR CT Scanner – Weadell, The product will supply to all over the world, such as: Vancouver, Paraguay, Chile, Our advanced equipment, excellent quality management, research and development ability make our price down. The price we offering may not be the lowest, but we guarantee it is absolutely competitive! Welcome to contact us immediately for future business relationship and mutual success!
By Elizabeth from Uganda - 2018.07.27 12:26
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Sandra from Mexico - 2017.02.14 13:19
